Various Units
DKG-253
The DKG-253 is a low-cost electronic control unit designed to control engine speed with a quick and accurate response to changes in charging.
The unit is housed in a metal case and consists of a single enamel with a printed circuit board, for reliable operation in harsh vehicle environments.
The DATGOM DKG-188 Input Extension Unit is used to increase the number of digital inputs of a DKG-xxx control module.
The module provides 8 digital inputs. The input signal is type “close to negative battery” when active.
The Input Input Unit is universal and can be used in conjunction with any DKG-xxx unit offered by an expansion connector. DKG-xxx modules typically support modules of 2 or 4 expansion modules, providing a maximum of 16 or 32 additional digital outputs.
DKG-188
DKG-186
The DATAKOM Fet Extension unit is used to increase the number of digital outputs of a DKG-xxx control module.
The charger extension unit provides 8 protected and short-circuit protected load shifts that attract to negative batteries when active.
The FET expansion unit is universal and can be used together with any DKG-xxx unit that includes an expansion connector. DKG-xxx modules typically support modules of 2 or 4 expansion modules, providing a maximum of 16 or 32 digital ports.
The Datakom Battery Monitor is a compact unit used by communication systems. It monitors the charge level of the telecom batteries in order to power external battery charging systems, such as diesel production systems. The unit is designed to be installed on a DIN rail, inside a panel. It is the same size as two standard circuit breakers. Thanks to the optical isolation between the input and output, the unit can be used in various systems, including ganset control systems. The unit has an adjustable accuracy threshold level for low battery detection. The adjustment is made from the front panel with a screwdriver. Charging and discharging items indicate the current status of the battery
DKG-184
DKG-605
DATAKOM Model DKG-605 is a compact 8-channel programmable alarm annunciator unit used in the production of diesel engine kits and kits.
Programming is carried out using the DKG-605-P handheld terminal unit
- 8 Relay Outputs
- Expand to 16 relays with additional DKG-705R
- Two NO/NC connectors are provided
- Function Relay Selectable from DKG-705
DKG-705R is a relay expansion unit designed for use with the DKG-705 unit. It has 8 16 amps. volts without a contact plate.
The relay functions can be selected from a list of 112 entries that use the DKG-705 mode. A maximum of 2 DKG-705R are cascadable to extend the relay number of DKG-705 to 23.
The connection to the DKG-705 is done using a standard six-cable telephone cable.
3XX/5XXR
DKG-190
DKG-190 is a high-tech product designed to reduce the operating hours of ganstrians used in telecommunications systems.
The unit brings considerable economies of scale to operate the running hours, fuel consumption and service cost.
In simple telecom systems, gensets run during power failure failures. Thus, the generation run time is equal to the sum of the cable hours.
The DKG-190 feeds the existing thief control unit with AC voltage that it generates internally and prevents the motor from running when it is not needed. It can be adapted to any make and model of the ganst control unit.
